Gemstone Earrings Guide
On this page:
Instructions for Stud Earrings
Instructions for Drop Earrings
Stud Earrings
Putting on the Earrings
When putting on the earring, be sure to press on the gem at the front, while attaching the earring back.

Make sure the gem and its silicon seal are fitted snuggly into the hole with no visible gap.

Replacing the Gemstones
Removing the Gemstone:
Pull the gemstone out of the front of the earring.
Pull the gemstone out of the front of the earring.

Inserting the Gemstone:
From the front of the earring, gently push the gem so that the pin slides all the way through the hole until the silicon seal is snuggly fitted into the metal.
If you feel any resistance, pull the gem out and try again. Do not force the gem in.
From the front of the earring, gently push the gem so that the pin slides all the way through the hole until the silicon seal is snuggly fitted into the metal.
If you feel any resistance, pull the gem out and try again. Do not force the gem in.


Drop Earrings
Putting on the Earrings
When putting on the earring, be sure to press on the gem at the front, while attaching the earring back.

Make sure the gem and its silicon seal are fitted snuggly into the hole with no visible gap.

Replacing the Gemstones
Removing the Top Gemstone:
Pull the gemstone out of the metal frame.
Pull the gemstone out of the metal frame.

Inserting the Top Gemstone:
Gently push the gem so that the pin slides all the way through the hole until the silicon seal is snuggly fitted into the metal.
Never force the gem in. If you feel any resistance, pull it out and try again.
Gently push the gem so that the pin slides all the way through the hole until the silicon seal is snuggly fitted into the metal.
Never force the gem in. If you feel any resistance, pull it out and try again.

Removing the Drop Gemstone:
Pull the gemstone out of the front of the earring.
Pull the gemstone out of the front of the earring.

Inserting the Drop Gemstone:
Gently push the new gemstone into the frame while holding the silicon seal in position at the back of the earring.
Gently push the new gemstone into the frame while holding the silicon seal in position at the back of the earring.

Replacing the Silicon Seal
If the silicon seal drops out, push it back into the frame with the flat side in and round side out.

